Copy
New Sense Smart Valve Monitors Electrolylte Level In Batteries.







New Sense Smart™
Electrolyte Sensor Valve
Takes The Guesswork Out Of
Watering Batteries

 
 

Corona, CA –Battery maintenance just got easier with the new Sense Smart™ Electrolyte Sensor Valve, a single replacement valve with a built-in probe and LED indicator that lets operators know when a set of batteries require watering.  Flooded lead-acid batteries used in golf cars, access lifts, cleaning machines, forklifts and many other vehicles, lose water from normal evaporation and charging. Adding a Sense Smart™ Electrolyte Sensor Valve into one of the batteries in the vehicle's battery set can monitor the electrolyte levels of the entire pack. 
 
"Many industries have switched to battery powered vehicles for their fleets, and know that flooded lead-acid batteries are the most cost effective method to power them," says Don Wallace, U.S. Battery CMO/Executive Vice President. "The problem is providing proper maintenance to all those batteries can be overwhelming and time consuming. The Sense Smart™ valve takes the guesswork out of battery watering maintenance, which when done routinely, can dramatically improve battery life, save time, and substantially reduce annual operating costs."
 
The Sense Smart™ valve is the only valve of its kind with a built-in processor and probe that triggers an LED indicator light, mounted to the battery pack, and tells operators if the battery set needs water. A solid green light indicates the electrolyte level of the set is okay. A solid red light tells operators to add water after the next full-charge. A blinking red light indicates the electrolyte level has been low for more than 10 days and requires immediate attention.
 
The Sense Smart™ Electrolyte Sensor Valve (TBU 1000) simply replaces one cell vent cap on a single battery of a connected battery set, and doesn't require drilling or calibration. An optional system (TBU 2000) includes a dash mounted LED indicator with a six-foot wire lead.  Manufactured by Battery Watering Technologies, and distributed exclusively through U.S. Battery Manufacturing, the Sense Smart™ valve fits a variety of 6-volt, 8-volt, and 12-volt batteries and works with all BWT single point watering systems. 
Visit www.usbattery.com

Click Here To Download The Sense Smart™ Flyer- PDF

Follow on Twitter   Friend on Facebook   Forward to Friend  Go To Our Website
Copyright © *U.S Battery Manufacturing Co., All rights reserved.


Our mailing address is:
U.S Battery
Manufacturing Co.
1675 Sampson Ave.
Corona, CA 92879

unsubscribe from this list   update subscription preferences