Weekly Specials and tips from Camp Creek Gunworks, your southside source for guns, gear, and gunsmithing for tactical or competitive use..
View this email in your browser
Report from the SC State Match:

This past weekend, the Palmetto Gun Club in Charleston hosted the 2018 State USPSA Championships.  It was a 9-stage match, featuring nothing but Field Courses.  Not a Speed Shoot or Standards Course to be seen.  That seemed to please a majority of the attendees!  The courses of fire, while not overly athletic, definitely tested your ability to enter and exit many shooting positions and shoot on-the-move. 

I had the pleasure of CRO'ing the Chronograph stage again.  This was EASY.  Not a single person got "bumped to Open" because of equipment violations, nor did anyone go "Minor" or "sub-Minor" on the chronograph.  [Side note:  One person DID get bumped to Open, but it was because of something he did on a stage.  It was an unloaded start and he loaded his Production gun with an 11-round magazine.  Ooooops.]

USPSA Production Division changes:

We are coming up on the 15th of May, the effective date for some rule changes in Production Division.  One of  the biggest changes is that the "2 ounces over factory stock weight" is now "4 ounces".  For some of the polymer-framed guns, this is an incredible increase.  If you're shooting a Shadow 2, I don't know if two more ounces is going to make a difference.  It's already heavy as a brick.... 

The other big change is the allowance for grip modifications.  You want to stipple your entire frame?  Go ahead and buy two soldering irons and have your kid start on one side while you start on the other.  You want to undercut the trigger guard?  Large Dremel sanding drums work really well for that.  I got some intel that one gunsmith is taking polymer frames, cutting out panels, and gluing in tungsten panels that will be covered by the silicon carbide grip tape.  He's able to add 2.5 ounces (so far).  All the weight is in the grip area (which makes me doubt the true effectiveness), but it is there.

I think that the most-advantageous place to add weight is in the dust cover, which means "heavier guide rods".  I think you'll start seeing large diameter guide rods made of tungsten.  You couldn't do that with only a 2 ounce allowance, but with 4, it is on!!

Mother's Day Special:

Is your Mom a badass?  If so, I 've got something for you!!!  How about giving dear ol' Mom the gift of a quality .45?  Until the 16th, I can offer the Remington 1911 R1 Carry for only $769.95 plus tax.  The regular DEALER price on this is over $900, so this is a smokin' deal.  Mom can enjoy features such as a Novak rear sight, tritium front sight, ambi safety, beavertail grip safety, 25 lpi frontstrap checkering, and a totally de-horned, snag-free profile.


Lots of folks make big purchases this time of year.  One of larger "capital" items that shooters buy is a reloading press.

I have recently gotten hooked up with a wholesaler who sells presses.  My dealer pricing is so good on these presses that I can offer them to you for a ridiculous price.  It doesn't matter whether you like blue presses, both flavors of red presses, or even the green ones, I can get them for a great price for you.

I am not going to run afoul of "Minimum Advertised Price" restrictions, but I will say this:  I just purchased my second "big press" by my favorite manufacturer.  I saved over $200 doing it this way rather than buying from the manufacturer's website.  (Those who know me know which brand and model I prefer.)  $200 is a lot of bullets to feed this thing....

E-mail me and let me know what you're looking for.  I'd bet that I can save you some money!!

Gun Cleaning Special:  Get the full-house, world-renowned CCGW cleaning job on your match guns, carry pieces, and hunting guns.  Most every gun will be only $25 each; complicated guns slightly higher.  (Glocks, M&Ps, 1911s/2011s, and the like are simple.  Benelli M-4s, piston-driven ARs, etc. are NOT.)  Turn-around time is typically less than a week.

We are offering complete basic guns built on our Camp Creek Gunworks-branded Lower Receivers, in addition to the full-house competition guns that we've always offered.  We're calling these mil-spec guns the "Basic Defense" series.  They feature a 16-inch barrel with A2 flash hider, a flat-top upper receiver, free-float handguard, collapsible stock, mil-spec trigger, mil-spec pistol grip, and the Magpul MOE trigger guard.  Add a soft case and 30-round MagPul magazine.  Of course, like all CCGW products, they're backed by our "We'll make it right" warranty.  The price is only $749 plus tax. 

Our latest thing has been PDWs (Personal Defense Weapons).  These are built off of our CR-15 lowers and feature short barrels (length depends on caliber and your desired features).  A pistol-stabilizing brace is added for greater accuracy potential.  5.56mm and .300 Blackout guns get the Noveske KX-5 suppressor.  9mm's don't need it.  An upgrade to a folding stock model is available for $300 more.  Prices start at $1500 for a basic model and go up to $3750 for the top-of-the-line model with EOTech HoloSight, TLR-2G light/laser combo, backup sights, premium SB Tactical brace, upgraded trigger, and custom fit case.

We have a 6-inch 2011 in-stock in .40 S&W.  It is built light, so it swings well from target to target.  The extra sight radius makes mid- and long-range shots EASY.  Only $2700

CCGW PCC's suitable for USPSA or 3-Gun competition are available.  Got one ready-to-go now for $950!

Glock 22C:  These are Blue Label Glocks (3 mags & night sights).  Brand new in the box for $499 plus tax.

Until next time, See you on the Range!!
Copyright © 2018 Camp Creek Gunworks, LLC, All rights reserved.

unsubscribe from this list    update subscription preferences 

Email Marketing Powered by Mailchimp